Rear Bumper Fascia Outer Support Replacement Model

Tools Required

J 38778 Door Trim Pad and Garnish Clip Removal

1. Remove the rear bumper fascia. Refer to Fascia Replacement-Rear Bumper.



2. Use the J 38778 to remove the rear bumper fascia to rear bumper fascia outer support push pin retainers.
3. Remove the rear bumper fascia outer support from the rear bumper fascia.

Notice: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

1. Install the rear bumper fascia outer support to the rear bumper fascia.
2. Install the rear bumper fascia outer support to rear bumper fascia push pin retainers.
3. Install the rear bumper fascia. Refer to Fascia Replacement-Rear Bumper.