Front Bumper Fascia Extension Replacement Model

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the push-in retainer from the front fender liner.
3. Remove the lower fascia support. Refer to Fascia Support Replacement in Bumpers.



4. Remove the screws to the front fender liner at the front of the front bumper fascia.



5. Remove the spring clips from the fascia extension.



6. Remove the fascia extension.

1. Install the fascia extension to the fascia by feeding the tabs of the extension through the fascia starting with the center tab and working outward.



2. Install the spring clips starting at the center of the fascia extension and working outward.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the screws to the front fender liner at the front of the front bumper fascia.

Tighten
Tighten the front fender liner to fascia screws to X N·m (XX lb in).




4. Install the push-in retainer to the front fender liner.
5. Install the lower fascia support. Refer to Fascia Support Replacement in Bumpers.
6. Lower the vehicle.