Front Bumper Fascia Retainer Replacement Model

1. Remove the front fascia. Refer to Fascia Replacement-Front Bumper.
2. Remove the bolts attaching the front fascia retainer to the bracket.
3. Remove the retainer.

1. Position the retainer to the upper bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts attaching the retainer to the bracket.

Tighten
Tighten the front fascia retainer bolts to X N·m (XX lb in).

3. Install the front fascia. Refer to Fascia Replacement-Front Bumper.