GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2001 🢒 Unit Repair 🢒 Body and Accessories 🢒 Seats 🢒 Seat Horizontal and Vertical Drive Cable Replacement

Removal Procedure
  1. Remove the front bucket seat. Refer to [ADD LINK].
  2. Remove the seat bottom and frame assembly. Refer to [ADD LINK].
  3. If the cable is equipped with a position sensor, remove the sensor retention clip and disconnect the electrical connector. [VEHICLE SPECIFIC]
  4. Remove the drive motor fasteners in order to allow the cable to be removed without damaging the drive cable.

    5. Object Number: 334291 Size: SH
  5. Squeeze the collar of the cable in order to release the cable.

    6. Object Number: 334292 Size: SH
  6. Pull the cable out of the fitting until the cable end clears the fitting.
  7. Remove the cable or cable/sensor assembly.

Installation Procedure

    Object Number: 334292 Size: SH
  1. Install the cable or cable/sensor assembly by pushing the ends into the fittings until the collar snaps into place.
  2. Install the drive motor fasteners.
  3. Install the seat bottom and frame assembly. Refer to [ADD LINK].
  4. Install the front bucket seat. Refer to [ADD LINK].