GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2001 🢒 Unit Repair 🢒 Body and Accessories 🢒 Body Rear End 🢒 Liftgate Window Replacement

Removal Procedure

    Object Number: 300373 Size: SH
  1. Open the liftgate window.

    2. Caution: When a lift window hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

  2. Support the liftgate window.
  3. Disconnect the window defogger electrical connectors, if equipped.
  4. Remove the liftgate window struts. Refer to [ADD LINK].
  5. Open the liftgate in order to expose the liftgate window hinges.
  6. With the aid of an assistant, remove the liftgate window hinge pin retainers from the hinge pins.
  7. Remove the liftgate window from the liftgate by sliding to the left.

Installation Procedure

    Object Number: 300373 Size: SH
  1. With the aid of an assistant, install the liftgate window to the liftgate by locating on pins and sliding to the right.
  2. Open the liftgate.
  3. Install the liftgate window hinge pin retainers.
  4. Close the liftgate (6) and open and support liftgate window.
  5. Install the liftgate window struts. Refer to [ADD LINK].
  6. Connect the liftgate window defogger electrical connectors, if equipped.
  7. Remove the support and close the window.