GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2001 🢒 Unit Repair 🢒 Body and Accessories 🢒 Body Rear End 🢒 Weatherstrip Replacement - Rear Lift Window Opening

Removal Procedure

    Caution: When a lift window hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.


    Object Number: 330421 Size: SH
  1. Open the rear lift window and support. (1).
  2. Remove the struts at the quarter inner roof panel. Refer to [ADD LINK].
  3. Peel the weather-strip (1) from the pinch weld flange in order to remove. (1).
  4. Clean the weather-strip sealer from the flange.

Installation Procedure

    Object Number: 330421 Size: SH
  1. Position the weather-strip to the top center of the flange.
  2. Install the upper corners from the corners to the center, across the top.
  3. Install the elbow areas from the elbow areas to the upper corners.
  4. Install the rear corners from the rear corners to the elbow areas.
  5. Install from the rear corners to the center, across the rear.
  6. Roll the entire weather-strip to the seat.
  7. Install the struts at the quarter inner roof panel. Refer to [ADD LINK].