GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2001 🢒 Unit Repair 🢒 Body and Accessories 🢒 Body Rear End 🢒 Weatherstrip Retainer Replacement

Removal Procedure

    Object Number: 376671 Size: SH
  1. Remove the push-in retainer securing the lower end of the weatherstrip to the lock pillar.
  2. Remove the door opening weatherstrip from the lock pillar retainer
  3. Remove the door opening weatherstrip from the roof retainer between the lock pillar and the windshield.

    4. Object Number: 376675 Size: SH
  4. Remove the fasteners securing the lock pillar retainer.
  5. Remove the lock pillar retainer.

Installation Procedure

    Object Number: 376675 Size: SH
  1. Install the lock pillar retainer.

    2. Tighten
    Tighten the lock pillar weatherstrip retainer fasteners to 3.4 N·m (30 lb in).

  2. Apply a 6 mm (0.25 in) x 100 mm (4 in) bead of sealer across the lower edge of the retainer and onto the lock pillar.
  3. Install the weatherstrip. Refer to [ADD LINK] in Stationary Windows.