GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2002 🢒 Unit Repair 🢒 Engine 🢒 Engine Mechanical - 2.2L (L61) 🢒 Water Pump Installation

Water Pump Installation LS

Prior to installing the water pump read the entire procedure. Pay special attention to avoid part damage and to ensure proper sealing.


    Object Number: 412423 Size: SH
  1. Install the water pump assembly.
  2. Install the water pump bolts. Finger tighten the bolts.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Tighten the water pump bolts.

    4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).


    Object Number: 412518 Size: SH
  4. Install the water feed tube.
  5. Lubricate the feed tube O-ring with silicone gel lubricant GM P/N 12345579.
  6. Install the water feed tube by twisting and pushing toward the water pump. Take care not to tear or damage the O-Ring.
  7. Install the thermostat housing to block bolts.

    8. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 630355 Size: SH
  8. Install the engine coolant temperature sensor by hand.
  9. Tighten the engine coolant temperature sensor.

    10. Tighten
    Tighten the engine coolant temperature sensor to 20 N·m (15 lb ft).

Water Pump Installation SUV

Prior to installing the water pump read the entire procedure. Pay special attention to avoid part damage and to ensure proper sealing.


    Object Number: 412423 Size: SH
  1. Install the water pump assembly.
  2. Install the water pump bolts. Finger tighten the bolts.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Tighten the water pump bolts.

    4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).


    Object Number: 746078 Size: SH
  4. Install the water feed tube.
  5. Lubricate the feed tube O-ring with silicone gel lubricant GM P/N 12345579.
  6. Install the water feed tube by twisting and pushing toward the water pump. Take care not to tear or damage the O-Ring.
  7. Install the thermostat housing to block bolts.

    8. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 746068 Size: SH
  8. Install the engine coolant temperature sensor by hand.
  9. Tighten the engine coolant temperature sensor.

    10. Tighten
    Tighten the engine coolant temperature sensor to 20 N·m (15 lb ft).