GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2003 🢒 Unit Repair 🢒 Driveline/Axle 🢒 Transfer Case - NVG 900 🢒 Axle Shaft Oil Seal Replacement

Axle Shaft Oil Seal Replacement for Generic Unit Repair 2003

Tools Required

    • J 4972-4 Output Shaft Needle Bearing Installer
    • J 29162 Rear Retainer Seal Installer
    • J 29369-2 Bushing and Universal Remover

    Object Number: 850513 Size: SH
  1. Remove the axle seal

    2. Object Number: 850519 Size: SH

    Important: Clean the seal bore in solvent. Inspect for nicks caused by seal removal.

  2. Using the J 29162 , install the axle shaft oil seal into the cover.
  3. Fill the transfer case with fluid, after it is installed in the vehicle, to the bottom of the fill plug hole, or 500 ml (17 oz).