For 1990-2009 cars only
Tools Required
| • | J 43066-1 Stator Shaft Seal Protector |
| • | J 43066-2 Stator Shaft Seal Pusher |
| • | J 43066-3 Stator Shaft Seal Sizer |
- Slide the J 43066-1 (2) over the stator shaft and position the J 43066-1 just above the seal groove. Coat the J 43066-1 with transmission fluid.
- Guide a NEW seal onto the J 43066-1 and slide the seal into the seal groove using the J 43066-2 (1).
- Remove the J 43066-1 and J 43066-2 .
- Using the J 43066-3 , size the seal.
- Leave the J 43066-3 in place for at least 5 minutes in order to properly size the seal.
