- Install the bottom piece of the transmission fluid baffle and the 3 bolts on the fluid pump assembly and the transmission case assembly.
- Install the driven sprocket on the fluid pump assembly.
- Install a NEW driven sprocket retaining ring.
- Install a drive sprocket thrust washer on the transmission case assembly.
- Install the drive sprocket and drive link assembly.
- Install the top piece of the transmission fluid baffle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 11 N·m (8 lb ft).
Important: The thrust washer locates the drive sprocket until the torque converter is installed.
