Removal Procedure
- Remove the right instrument panel (I/P) trim plate. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages, and Console.
- Use a small flat-bladed tool and pry the upper and the lower retainers of the air outlet deflector.
- Lift the deflector from the right I/P trim plate.
Installation Procedure
- Position the air outlet deflector to the upper retainer tabs on the right I/P trim plate.
- Position the deflector to the lower retainer tabs on the trim plate.
- Install the deflector to the trim plate. Press into place until the retainers are fully seated.
- Inspect the deflector for proper operation.
- Install the right I/P trim plate. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages, and Console.