Remote Control Door Lock Receiver Replacement for Generic Unit Repair 2003

1. Remove the instrument panel (I/P) trim panel. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages, and Console.



2. Disengage the retainers to the remote control door lock receiver from the I/P trim pad.
3. Disconnect the electrical connector (1) from the door lock receiver (2).
4. Remove the door lock receiver.

1. Connect the electrical connector (1) to the door lock receiver (2).
2. Install the door lock receiver to the I/P trim pad.
3. Install the I/P trim panel. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages, and Console.