Your vehicle may have a manual climate control system. With this system you can control the heating, cooling and ventilation for your vehicle.
To change the current mode, select one of the following from the right knob:
(Vent): This mode directs air to the instrument panel outlets.On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time it takes for your vehicle to cool down. It also helps the system to operate more efficiently.
For quick cool down on hot days, do the following:
Using these settings together for long periods of time may cause the air inside of your vehicle to become too dry. To prevent this from happening, after the air in your vehicle has cooled, turn the recirculation mode off.
The air conditioning system removes moisture from the air, so you may sometimes notice a small amount of water dripping underneath your vehicle while idling or after turning off the engine. This is normal.
Fog on the inside of windows is a result of high humidity or moisture condensing on the cool window glass. This can be minimized if the climate control system is used properly. There are two modes to clear fog or frost from your windshield. Use the defog mode to clear the windows of fog or moisture and warm the passengers. Use the defrost mode to remove fog or frost from the windshield more quickly.
Select one of these available modes from the right knob.
(Defog): This mode directs most of the air to the windshield and the floor outlets. A small amount of air is also directed to the outboard outlets for the side windows.To help clear the side windows quickly, do the following:
To help clear the windshield quickly, do the following:
Do not drive the vehicle until all windows are clear.
Your vehicle has a rear window and outside mirror defogger. This feature will only work when the ignition is turned to ON.
The rear window defogger uses a warming grid to remove fog or frost from the rear window. Before using this feature, clear as much snow from the rear window as possible.
(Rear): Press this button to turn the rear window and outside mirror defogger on or off. The button is located below the audio system. An indicator light in the button will come on to let your know that the feature is activated.The rear window and outside mirror defogger will turn off about 10 minutes after the button is pressed. The defogger can also be turned off by pressing the button again or by turning off the engine.
Notice: Do not use anything sharp on the inside of the rear window. If you do, you could cut or damage the warming grid, and the repairs would not be covered by the vehicle warranty. Do not attach a temporary vehicle license, tape, a decal or anything similar to the defogger grid.
Your vehicle may have a heated front windshield which can be used to defrost it. This feature will only work when the ignition is turned to ON.
There is a heated element along the bottom of the windshield used to heat the windshield.
(Rear): Press this button to heat the windshield. The button is located below the audio system. An indicator light in the button will come on to let your know that the feature is activated.The front windshield heater will turn off about 10 minutes after the button is pressed. It can also be turned off by pressing the button again or by turning off the engine.
With this system you can control the heating, cooling and ventilation for your vehicle.
To change the current mode, select one of the following from the middle knob:
(Vent): This mode directs air to the instrument panel outlets.The middle knob can also be used to select the defog and defrost modes. Information on defogging and defrosting can be found later in this section.
Temperature Control: Turn the right knob clockwise or counterclockwise to manually increase or decrease the temperature inside your vehicle. Turn the knob to the blue area to get cool air and to the red area to get warm air.On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time it takes for your vehicle to cool down. It also helps the system to operate more efficiently.
For quick cool down on hot days, do the following:
Using these settings together for long periods of time may cause the air inside of your vehicle to become too dry. To prevent this from happening, after the air in your vehicle has cooled, turn the recirculation mode off.
The air conditioning system removes moisture from the air, so you may sometimes notice a small amount of water dripping underneath your vehicle while idling or after turning off the engine. This is normal.
(Recirculation): This mode keeps outside air from coming into the vehicle. It can be used to prevent outside air and odors from entering your vehicle or to help heat or cool the air inside your vehicle more quickly. Press this button to turn the recirculation mode on. When the button is pressed, an indicator light in the button will come on. Press this button again to return to outside air mode. Using the recirculation mode for extended periods may cause your windows to fog. If this happens, select the defrost mode.Fog on the inside of windows is a result of high humidity or moisture condensing on the cool window glass. This can be minimized if the climate control system is used properly. There are two modes to clear fog or frost from your windshield. Use the defog mode to clear the windows of fog or moisture and warm the passengers. Use the defrost mode to remove fog or frost from the windshield more quickly.
Select one of these available modes from the right knob.
(Defog): This mode directs most of the air to the windshield and the floor outlets. A small amount of air is also directed to the outboard outlets for the side windows and to the instrument panel side outlets.To help clear the side windows quickly, do the following:
To help clear the windshield quickly, do the following:
Do not drive the vehicle until all windows are clear.
Your vehicle may have a rear window and outside mirror defogger. This feature will only work when the ignition is turned to ON.
The rear window defogger uses a warming grid to remove fog or frost from the rear window. Before using this feature, clear as much snow from the rear window as possible.
(Rear): Press this button to turn the rear window and outside mirror defogger on or off. An indicator light in the button will come on to let your know that the rear window defogger is activated.The rear window defogger will turn off about 10 minutes after the button is pressed. The defogger can also be turned off by pressing the button again or by turning off the engine.
Notice: Do not use anything sharp on the inside of the rear window. If you do, you could cut or damage the warming grid, and the repairs would not be covered by the vehicle warranty. Do not attach a temporary vehicle license, tape, a decal or anything similar to the defogger grid.
With this system you can control the heating, cooling and ventilation for your vehicle.
To change the current mode, select one of the following from the right knob:
(Vent): This mode directs air to the instrument panel outlets.The right knob can also be used to select the defog and defrost modes. Information on defogging and defrosting can be found later in this section.
(Recirculation): This mode keeps outside air from coming into the vehicle. It can be used to prevent outside air and odors from entering your vehicle or to help heat or cool the air inside your vehicle more quickly. If your vehicle has a recirculation button (uplevel model), press the button to turn the recirculation mode on. When the button is pressed, an indicator light in the button will come on. Press the button again to return to outside air mode. If your vehicle has an air intake lever (base model), move the lever to choose the recirculation mode. Using the recirculation mode for extended periods may cause your windows to fog. If this happens, select the defrost mode.On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time it takes for your vehicle to cool down. It also helps the system to operate more efficiently.
For quick cool down on hot days, do the following:
Using these settings together for long periods of time may cause the air inside of your vehicle to become too dry. To prevent this from happening, after the air in your vehicle has cooled, turn the recirculation mode off.
The air conditioning system removes moisture from the air, so you may sometimes notice a small amount of water dripping underneath your vehicle while idling or after turning off the engine. This is normal.
Fog on the inside of windows is a result of high humidity or moisture condensing on the cool window glass. This can be minimized if the climate control system is used properly. There are two modes to clear fog or frost from your windshield. Use the defog mode to clear the windows of fog or moisture and warm the passengers. Use the defrost mode to remove fog or frost from the windshield more quickly.
For best results, clear all snow and ice from the windshield before defrosting.
Select one of these available modes from the right knob.
(Defog): This mode directs most of the air to the windshield and the floor outlets. A small amount of air is also directed to the outboard outlets for the side windows.To help clear the side windows quickly, do the following:
To help clear the windshield quickly, do the following:
Do not drive the vehicle until all windows are clear.
Your vehicle may have a rear window and outside mirror defogger. This feature will only work when the ignition is turned to ON.
The rear window defogger uses a warming grid to remove fog or frost from the rear window. Before using this feature, clear as much snow from the rear window as possible.
(Rear Window Defogger): Press this button to turn the rear window and outside mirror defogger on or off. An indicator light in the button will come on to let you know that the feature is activated. The defogger can be turned off by pressing the button again or by turning the engine off.Notice: Do not use anything sharp on the inside of the rear window. If you do, you could cut or damage the warming grid, and the repairs would not be covered by the vehicle warranty. Do not attach a temporary vehicle license, tape, a decal or anything similar to the defogger grid.