Turn Signal Lamps Side

To replace a side turn signal bulb:

1. Open the hood. See Hood Release for more information.
2. See Steps 2 through 5 under Headlamps to access the side turn signal lamps.
3. Remove the side turn signal lamp assembly by pulling it forward.
4. Turn the bulb socket counterclockwise.



5. Remove the bulb from the lamp housing by pulling the bulb straight out of the socket.
6. Install the new bulb into the bulb socket by pushing it in and rotating the bulb socket clockwise.
7. Push the side turn signal lamp assembly back into its original position.

Turn Signal Lamps Side

Your vehicle may have this side turn signal lamp. It will be located between the front door and the wheel well. To replace this bulb:

1. Locate the bulb by reaching underneath the vehicle where the side turn signal lamp is located.
2. Remove the side turn signal lamp assembly by pulling it forward.
3. Turn the bulb socket counterclockwise.



4. Remove the bulb from the lamp housing by pulling the bulb straight out of the socket.
5. Install the new bulb into the bulb socket by pushing it in and turning it clockwise.
6. Push the side turn signal lamp assembly back into its original position.