Front Turn Signal and Parking Lamps Hatchback

To replace a front turn signal or parking lamp bulb:

1. Open the hood. See Hood Release .
2. Remove the five screws from the top of the radiator grille and remove the radiator grille.



3. Remove the three bolts from the headlamp assembly and remove the headlamp assembly.
4. Disconnect the wiring harness from the rear of the bulb.



5. Turn the front turn signal bulb socket counterclockwise.
6. Pull the front turn signal bulb socket out of the lamp housing.
7. Press the bulb inward and turn it counterclockwise to remove it from the bulb socket.
8. Press the new bulb and turn it clockwise to install.
9. Turn the socket clockwise to install.
10. Reconnect the wiring harness at the rear of the bulb.



11. Reinstall the headlamp assembly and three bolts.

To replace a front turn signal or parking lamp bulb, do the following:

1. Open the hood. See Hood Release for more information.
2. Remove the two bolts from the top of the headlamp assembly and one nut on the inside that retains the headlamp assembly.

Sedan and Wagon Models





Hatchback Models




3. Turn the bulb socket counterclockwise.
4. Pull the bulb socket out of the lamp housing.
5. Press the bulb inward and turn it counterclockwise to remove it from the bulb socket.
6. Install the new bulb into the bulb socket by pressing it in and turning it clockwise.
7. Reinstall the bulb socket into the lamp housing by turning it clockwise.
8. Reverse Steps 1 through 2 to install the assembly.