GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2005 🢒 Unit Repair 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Ambient Air Temperature Gage Sensor Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 1465929 Size: SH
  2. Remove the fascia grille. Refer to Front Bumper Upper Fascia Grille Replacement in Bumpers.

    3. Object Number: 1346676 Size: SH
  3. Remove the fastener retaining the ambient air temperature sensor to the front impact bar.
  4. Disconnect the electrical connector from the ambient air temperature sensor.
  5. Remove the sensor from the vehicle.

Installation Procedure

    Object Number: 1346676 Size: SH
  1. Connect the electrical connector to the ambient air temperature sensor.
  2. Position the ambient air temperature sensor to the front impact bar. Ensure that the locating tabs on the sensor are seated into the holes on the impact bar.
  3. Install the fastener to the ambient air temperature sensor.

    4. Object Number: 1465929 Size: SH
  4. Install the fascia grille. Refer to Front Bumper Upper Fascia Grille Replacement in Bumpers.
  5. Close the hood.