Caution: Refer to SIR Caution in the Preface section.
1.1. | Aim the wheels straight ahead. |
1.2. | Align the block tooth and the centering mark on the race and upper shaft assembly at the 12 o'clock position. |
Important: The new SIR coil will be pre-centered. Do not remove the centering tab from the new SIR coil until the installation is complete. If the SIR coil does not come with a centering tab, you must center the SIR coil.
Important: The new SIR coil will be pre-centered. Do not remove the centering tab from the new SIR coil until the installation is complete.