Front Seat Replacement - Bucket for Generic Unit Repair 2005

1. Move the seat full forward.
2. Remove the seat belt anchor bolt from the front seat assembly. Refer to Seat Belt Retractor Pretensioner Replacement - Front .



3. Remove the front seat mounting fasteners and tilt the seat forward.
4. Disconnect the electrical wire harness and remove the push-in fastener from beneath the seat.
5. Remove the seat.

1. Perform the front seat track synchronization procedure. Refer to Front Seat Track Synchronization .
2. Install the seat into the vehicle.



3. Connect the electrical wire harness and install the push-in fastener beneath the seat.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the front seat mounting fasteners.

Tighten
Tighten the fasteners to 45 N·m (33 lb ft).

Important: Verify that the shoulder belt is not twisted.

5. Install the seat belt anchor bolt to the front seat assembly. Refer to Seat Belt Retractor Pretensioner Replacement - Front .