GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2006 🢒 Unit Repair 🢒 Engine 🢒 Engine Mechanical - 6.0L 🢒 Intake Manifold Installation

    Object Number: 1552471 Size: SH

    Important: 

       • The intake manifold, throttle body, fuel injection rail and fuel injectors may be removed as an assembly. If not servicing the individual components, install the intake manifold as a complete assembly.
       • DO NOT use the intake manifold gaskets again. Install NEW intake manifold-to-cylinder head gaskets.

  1. Install NEW intake manifold-to-cylinder head gaskets (514).

    2. Object Number: 1559849 Size: SH
  2. Install the intake manifold (500).
  3. Apply a 5 mm (0.20 in) band of threadlock GM P/N 12345382 (Canadian P/N 10953489) to the threads of the intake manifold bolts (512). Refer to Adhesives, Fluids, Lubricants, and Sealers .

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1552512 Size: SH
  4. Install the intake manifold bolts and fuel rail stop brackets.

    5. Tighten

    1. Tighten the intake manifold bolts (1-10) a first pass in sequence to 5 N·m (44 lb in).
    2. Tighten the intake manifold bolts (1-10) a final pass in sequence to 10 N·m (89 lb in).

    Object Number: 1408858 Size: SH
  5. Lubricate the manifold absolute pressure (MAP) sensor grommet (715) with clean engine oil.
  6. Install the MAP sensor (714) and grommet (715).

    7. Object Number: 1408859 Size: SH
  7. Install the evaporative emission (EVAP) canister purge solenoid valve (730), bracket (741), and bolt (742).

    8. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).

  8. Install the EVAP tubes (729, 735).
  9. Install the fuel rail. Refer to Fuel Rail and Injectors Installation.