Clutch Pilot Bearing Installation for Generic Unit Repair 2006

Tools Required

J 38836 Bushing Installer and Clutch Arbor

1. Install a 5/8 inch washer (1) onto the J 38836 , or equivalent.

The washer serves as a stop against the crankshaft face and assists in installing the bearing to the proper depth.

2. Install the new pilot bearing (2) onto the tool.



3. Install the new pilot bearing into the crankshaft using the J 38836 .



4. Inspect the clutch pilot bearing for proper installation.

A properly installed clutch pilot bearing will be installed until flush to the rear face of the crankshaft.