GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2006 🢒 Unit Repair 🢒 Engine 🢒 Engine Electrical 🢒 Generator Bracket Replacement

Removal Procedure
  1. Turn the ignition OFF.
  2. Remove the generator. Refer to Generator Replacement .
  3. Remove the coolant inlet pipe lower bolt from the generator bracket.
  4. Remove the belt tensioner. Refer to Drive Belt Tensioner Replacement .

    5. Object Number: 887707 Size: SH
  5. Remove the generator bracket bolts.
  6. Remove the generator bracket.

Installation Procedure

    Object Number: 887707 Size: SH
  1. Install the generator bracket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the generator bracket bolts.

    3. Tighten
    Tighten the generator bracket bolts in the sequence shown.

    2.1. Tighten the generator bracket bolts (1) to 50 N·m (37 lb in).
    2.2. Tighten the generator bracket bolts (2) to 50 N·m (37 lb in).
    2.3. Tighten the generator bracket bolt (3) to 23 N·m (17 lb in).
  3. Install the belt tensioner. Refer to Drive Belt Tensioner Replacement .
  4. Install the coolant inlet pipe lower bolt from the generator bracket.
  5. Install the generator. Refer to Generator Replacement .