Removal Procedure
- Remove the rear window shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
.
- Disengage the outboard receiver retainers from the rear shelf.
- Lift the receiver from the rear window shelf trim panel and disconnect the electrical connector.
- Remove the receiver.
Installation Procedure
- Connect the electrical connector to the receiver.
- Install the receiver by positioning the inboard retainer to the slot in the rear window shelf trim panel. Press the outboard retainers into the rear window shelf trim panel openings.
- Install the rear window shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
.
- If a new remote control door lock receiver is being installed, program the transmitters. Refer to
Control Module References
for programming and setup information.