Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Turn Signal/Stop Lamp Assembly Replacement - Rear

1

Nut, Turn Signal/Tail Lamp (Qty: 3)

Tip
Pull back rear compartment carpet to gain access to lamp.

Tighten
2 N·m (18 lb in)

2

Lamp, Turn Signal/Tail Lamp

Tip
Twist the bulb socket and pull inward to replace the bulb.

License Lamp Replacement

3

Screws, License Lamp (Qty: 2)

Tighten
2 N·m (18 lb in)

4

Lamp, License Lamp

Tip
Twist the bulb socket and pull inward to replace the bulb.