Removal Procedure
- Remove the upper center pillar trim. Refer to
Center Pillar Upper Trim Panel Replacement
.
- Remove the lower center pillar trim. Refer to
Center Pillar Lower Trim Panel Replacement
.
- Remove the guide loop nut.
- Remove the guide loop from the guide adjuster bracket.
- Remove the intermediate guide bolt.
- Remove the seat belt retractor bolt.
- Remove the seat belt retractor from the T-slot in the lower center pillar.
Installation Procedure
- Install the belt retractor into the T-slot in the center pillar.
Notice: Refer to Fastener Notice in the Preface section.
- Install the seat belt retractor bolt.
Tighten
Tighten the seat belt retractor bolt to 45 N·m (33 lb ft).
- Install the intermediate guide bolts.
Tighten
Tighten the intermediate guide bolts to 10 N·m (89 lb in).
- Position the guide loop to the guide adjuster bracket.
- Install the guide loop nut.
Tighten
Tighten the guide loop nut to 42 N·m (31 lb ft).
- Install the lower center pillar trim. Refer to
Center Pillar Lower Trim Panel Replacement
.
- Install the upper center pillar trim. Refer to
Center Pillar Upper Trim Panel Replacement
.