Tools Required
J 37096
Flywheel Holder
Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the torque converter cover bolts.
- Remove the torque converter covers.
- Install the
J 37096
in order to gain access to the torque converter bolts and to prevent the flywheel
from turning.
- Remove the flywheel to torque converter bolts.
Installation Procedure
- Install the
J 37096
in order to gain access to the torque converter bolts and to prevent the flywheel
from turning.
Notice: Refer to Fastener Notice in the Preface section.
- Install the flywheel to torque converter bolts.
Tighten
Tighten the bolts to 63 N·m (46 lb ft).
- Install the torque converter covers.
- Install the torque converter cover bolts.
Tighten
Tighten the bolts to 10 N·m (89 lb in)
- Lower the vehicle.