Tools Required

1. Remove the fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement.
2. Remove the retaining clip (1) for the fuel injector (3).

Notice: Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles. Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.

3. Remove the fuel injector (1) from the fuel rail.

1. Apply a small amount of clean motor oil to the O-rings (2) and (4), before installing the new fuel injector.
2. Install the fuel injector (3) in the fuel rail.
3. Install the retaining clips for the fuel injector (1).
4. Install the fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement.
5. Inspect for leaks:

5.1.	Turn the ignition ON for 2 seconds.

5.2.	Turn the ignition OFF for 10 seconds.

5.3.	Turn the ignition switch ON.

5.4.	Inspect for fuel leaks.