Tools Required

J 41712 Oil Pressure Sensor Socket

1. Clean area around the oil sensor/switch before removing it.



2. Disconnect the electrical connector for the oil pressure sensor/switch (2).



3. Remove the oil pressure sensor/switch with the J 41712  (1).

1. If installing the old sensor, coat the threads with sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the oil pressure sensor/switch with the J 41712  (1).

Tighten
Tighten the engine oil pressure sensor to 35 N·m (26 lb ft).




3. Reconnect the oil pressure sensor/switch electrical connector (2).