The fuel pressure connection is non-replaceable, but it is serviceable.

Caution: Refer to Gasoline/Gasoline Vapors Caution in the Preface section.

1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief.



3. Remove the fuel pressure connection cap.



4. Use a standard valve core removal tool in order to remove the valve core assembly.
5. Discard the valve core assembly.

1. Use the standard valve core tool in order to install a new valve core assembly.
2. Connect the negative battery cable.
3. Inspect for fuel leaks through the following steps:

3.1.	Ignition ON for 2 seconds.

3.2.	Ignition OFF for 10 seconds.

3.3.	Ignition ON, inspect for fuel leaks.




4. Install the fuel pressure connection cap.