Crankshaft Balancer Removal VE

Tools Required

Notice: Refer to Fastener Notice in the Preface section.





Important: Do not use the crankshaft balancer bolt again. Install a NEW crankshaft balancer bolt during final assembly.

1. Install the J 42386-A and bolts.

Use 1 M10 - 1.5 x 120 mm and 1 M10 - 1.5 x 45 mm bolt for proper tool operation.

Tighten
Tighten the J 42386-A bolts to 50 N·m (37 lb ft).




2. Remove the crankshaft balancer bolt (139).

Do not discard the crankshaft balancer bolt. The balancer bolt will be used during the balancer installation procedure.




3. Use the J 41816-A  (1) and the J 41816-2  (2) in order to remove the crankshaft balancer.



4. Remove the crankshaft balancer (1).



5. Remove the crankshaft balancer washer (1) from the balancer.
6. Remove the J 42386-A and bolts.

Crankshaft Balancer Removal VZ

Tools Required

Notice: Refer to Fastener Notice in the Preface section.





Important: Do not use the crankshaft balancer bolt again. Install a NEW crankshaft balancer bolt during final assembly.

1. Install the J 42386-A and bolts.

Use one M10 - 1.5 x 120 mm and one M10 - 1.5 x 45 mm bolt for proper tool operation.

Tighten
Tighten the J 42386-A bolts to 50 N·m (37 lb ft).




2. Remove the crankshaft balancer bolt (139).

Do not discard the crankshaft balancer bolt. The balancer bolt will be used during the balancer installation procedure.




3. Use the J 41816-A  (1) and the J 41816-2  (2) in order to remove the crankshaft balancer.



4. Remove the crankshaft balancer (1).
5. Remove the J 42386-A and bolts.