GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2008 🢒 Unit Repair 🢒 Engine 🢒 Engine Mechanical - 6.0L 🢒 Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation VE


    Object Number: 1401956 Size: SH
  1. Inspect the O-ring seal (421) for cuts or damage. If the oil level indicator tube O-ring seal is not cut or damaged, it may be used again.
  2. Lubricate the O-ring seal with clean engine oil.
  3. Install the O-ring seal onto the oil level indicator tube (420).
  4. Install the oil level indicator tube into the engine block and rotate into proper position.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the tube bolt (419).

    6. Tighten
    Tighten the oil level indicator tube bolt to 25 N·m (18 lb ft).

  6. Install the oil level indicator (418) into the tube.

Oil Level Indicator and Tube Installation VZ


    Object Number: 309750 Size: SH
  1. Inspect the O-ring seal for cuts or damage. If the oil level indicator tube O-ring seal is not cut or damaged, it may be used again.
  2. Lubricate the O-ring seal with clean engine oil.
  3. Install the O-ring seal onto the oil level indicator tube.
  4. Install the oil level indicator tube into the engine block and rotate into proper position.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the tube bolt.

    6. Tighten
    Tighten the oil level indicator tube bolt to 25 N·m (18 lb ft).

  6. Install the oil level indicator into the tube.