SMU-6E2-REVISED DTC 42 CAMSHAFT POSITION (CMP) SENSOR

SUBJECT: SERVICE MANUAL UPDATE-SECTION 6E2-REVISED DTC 42 CAMSHAFT POSITION (CMP) SENSOR CIRCUIT (NO SIGNAL FOR 2 SECONDS)

MODELS: 1993-94 GEO METRO WITH 1.0L ENGINE (VIN 6 - RPO LP2)

THIS BULLETIN UPDATES THE DIAGNOSTIC CHART DTC 42 IN THE SERVICE MANUAL SECTION 6E2. THE ATTACHED REPLACEMENT PAGE SUPERSEDES THE DIAGNOSTIC CHART ORIGINALLY PUBLISHED IN THE SERVICE MANUAL.

FIGURES: 0 ATTACHMENTS: 1

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1994 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.