SMU - SECTION 8A - 64 REVISED SCHEMATICS. Geo Metro 1993

---------------------------------------------------------------------- SERVICE MANUAL UPDATE ----------------------------------------------------------------------

SUBJECT: SECTION 8A-64 REVISED SCHEMATICS

MODELS: 1993-94 GEO METRO

THE FOLLOWING ATTACHED SCHEMATICS (8A-64-0, 8A-64-1 AND 8A-64-2) SERVE TO REPLACE THE RESPECTIVE SCHEMATICS FOUND IN SECTION 8A-64, HVAC: COMPRESSOR CONTROL OF THE 1993 GEO METRO SERVICE MANUAL (ST370-93) AND THE 1994 GEO METRO SERVICE MANUAL (ST370-94).

THE LOCATION FOR CONNECTOR C208 AS STATED IN THE COMPONENT LIST OF PAGE 8A-64-5 IN THE 1993 GEO METRO SERVICE MANUAL (ST370-93) AND THE 1994 GEO METRO SERVICE MANUAL (ST370-94) IS INCORRECT. THE CORRECT "LOCATION" FOR THIS SHOULD READ AS FOLLOWS: "MAIN HARNESS TO INNER A/C HARNESS, BEHIND RH I/P NEAR RH KICK PANEL". THE COMPONENT LOCATION VIEWS FOUND IN SECTION 8A-201 ARE CORRECT.

FIGURES: 0 ATTACHMENTS: 3

Object Number: 77805 Size: FS

Object Number: 77185 Size: FS

Object Number: 78748 Size: FS

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.