GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Geo 🢒 1996 🢒 Metro 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Release Bearing Replacement

Removal Procedure
  1. Remove the manual transaxle from the vehicle. Refer to Transaxle Assembly Removal in Manual Transmission 5 Speed Suzuki.

    2. Object Number: 184953 Size: SH
  2. Remove the clutch release shaft return spring (2) from the clutch release shaft fork.
  3. Remove the clutch release bearing pin from the transaxle input shaft.
  4. Remove the clutch release bearing (1) from the transaxle input shaft.

    5. Important: Do not clean the clutch release bearing with degreaser or solvents. Cleaning the clutch release bearing with degreaser or solvents damages bearing seals.

  5. Clean the clutch release bearing with a clean dry solvent free cloth.
  6. Inspect the clutch release bearing for external damage and smooth rotation. Replace the clutch release bearing if external damage exists or bearings do not operate smoothly.

Installation Procedure

    Object Number: 184955 Size: SH
  1. Lubricate the clutch release bearing (2) with a thin coat of wheel bearing grease of GM P/N 1051344 or the equivalent.
  2. Install the clutch release bearing onto the transaxle input shaft (4). Secure the clutch release shaft fork (1) with the clutch release bearing pin.
  3. Install the clutch release shaft return spring to the clutch release shaft fork.
  4. Install the transaxle assembly into the vehicle. Refer to Transaxle Assembly Installation in Manual Transmission 5 Speed Suzuki.