SMU-SEC. 1D-REV. SPECIAL SERV. TOOL NUMBERS. Geo Metro 1996

SUBJECT: SERVICE MANUAL UPDATE - SECTION 1D - REVISED SPECIAL SERVICE TOOL NUMBERS (COMPRESSOR SHAFT SEAL REMOVER/INSTALLER; SHAFT SEAL PROTECTOR)

MODELS: 1995-97 GEO METRO

THIS BULLETIN IS BEING ISSUED TO REVISE THE SPECIAL SERVICE TOOL NUMBERS FOR THE COMPRESSOR SHAFT SEAL REMOVER/INSTALLER (J41387) AND THE SHAFT SEAL PROTECTOR (J36049) REFERENCED IN SECTION 1D OF THE SERVICE MANUAL.

THE CORRECT SERVICE TOOLS ARE AS FOLLOWS:

J33942-B COMPRESSOR SHAFT SEAL REMOVER/INSTALLER

J34614 COMPRESSOR SHAFT SEAL PROTECTOR

FIGURES: 00 ATTACHMENTS: 00

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.