I/P CUP HOLDER BINDING/STUCK REMOVE AND WASH HOLDER ASSY.

SUBJECT: INSTRUMENT PANEL CUP HOLDER BINDING/STUCK (REMOVE AND WASH CUP HOLDER ASSEMBLY)

VEHICLES AFFECTED: 1991-93 "B, J, L, S" MODELS AND "C/K" TRUCKS

THIS BULLETIN SUPERSEDES AND REPLACES CORPORATE BULLETIN REFERENCE NUMBER 238301.** THIS BULLETIN IS BEING REVISED TO ADD THE 1993 MODEL YEAR AND MODELS INVOLVED AND TO CHANGE THE WARRANTY INFORMATION.

CONDITION:

--------- Some owners of 1991-93 "B/J/L/S" cars and C/K trucks (with bench seats) may comment on the operation of the Instrument Panel (I/P) cup holder as sticking or binding.

CAUSE:

----- Carbonated soft drinks or fruit juices spilled on the sliding surfaces of the tracks may inhibit free movement of the cup holder.

CORRECTION:

--------- Free operation may be restored as follows:

1. Remove VP cup holder as outlined in appropriate service manual.

2. Wash thoroughly with luke-warm water and mild hand or dish soap and air dry. Harsh, chlorinated or soaps containing grit should not be used.

3. Reinstall cup holder.

This is not to be considered a warranty expense item and cup holders should not be replaced for this condition.

** BULLETIN REFERENCES: ---------------------- Corporate Ref. 238301

General Motors of Canada 92-2-207

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.