For 1990-2009 cars only
- Using J 39200 or equivalent, check for continuity between the terminals of the TP sensor (1) according to the resistance table.
- Tighten the TP sensor attaching screws.
- Connect the TP sensor electrical connector.
- Connect the negative battery cable.
Tighten
Tighten the negative battery cable-to-negative terminal retainer to 15 N·m (11 lb ft).
Clearance Between Lever and Stop Screwr | Between Terminals | Resistance |
|---|---|---|
0 mm (0 in) | VTA-E2 | 0.2-5.7 k ohms |
0.40 mm (0.016 in) | IDL-E2 | 2.3k ohms or less |
0.90 mm (0.035 in) | IDL-E2 | Infinity |
Throttle Valve Fully Open | VTA-E2 | 2.0-10.2k ohms |
-- | VC-E2 | 2.5-5.9k ohms |
