FLUID LEAK DETECTION SPEC. FLUID/BLACK LIGHT USE

Model and Year: ALL MODELS

TO: ALL CHEVROLET DEALERS

When customer vehicles are brought in for fluid leaks from the engine, transmission, cooling system, etc., locating the source of the leak can be challenging.

If the leak is a result of a porous casting, a split seal, or a small pin hole in a hose for example, the source of the leak can be located faster and more accurately with the use of a special fluid additive and a "high intensity" ultraviolet (UV) black light.

These special additives (Dyes) can be added to any mineral based fluid such as engine oil, transmission fluid, engine coolant, pover steering and real axle oil. These special dyes do not harm any GM recommended fluids and usually dissipate after approximately 300 miles of use.

When the dyes are added to the fluid and properly mixed together (done by normal driving) and then exposed to tbe black llght, the fluid glows a bright yellow or bright green. This allows the source of the leak to be pinpointed, leading to reliable leak correction. There are both "low intensity" and "high intensity" black lights available. The "high intensity" light is preferred, as it has a more concentrated light beam.

"High intensity" black lights are available from several sources, including Kent Moore Tool (J-28428-A) and the GM Tool Equipment Program (#041-00001).

Additives (Dyes) are also available from Kent Moore

J-28431 - Suitable for engine oil, transmission oil, P/S fluid, and rear axle oils.

J-29545 - Used- in engine coolant only.

The additives are shipped in a box of 24 one-ounce tubes.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.