SMU - SECTION 7C REVISED SPECIAL SERVICE TOOL NUMBERS. Geo Tracker

********************************************************************** SERVICE MANUAL UPDATE **********************************************************************

SUBJECT: SECTION 7C - REVISED SPECIAL SERVICE TOOL NUMBERS

MODELS: 1994 GEO TRACKER

THIS BULLETIN AMENDS ALL REFERENCES MADE TO THE USE OF CLUTCH RELEASE OUTER BUSHING REMOVER (J34861) AND CLUTCH SHAFT OUTER BUSHING INSTALLER (J41042) SPECIAL SERVICE TOOLS IN SECTION 7C OF THE 1994 GEO TRACKER SERVICE MANUAL (ST377-94). THE SPECIAL SERVICE TOOLS RECOMMENDED ARE AS FOLLOWS:

. CLUTCH RELEASE OUTER BUSHING REMOVER - J37973

. CLUTCH SHAFT OUTER BUSHING INSTALLER - J36037

FIGURES: 0

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.