GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L60-E/4L65-E 🢒 Floor Shift Control Knob Replacement

Removal Procedure

    Object Number: 896833 Size: SH
  1. Loosen the set screw (1).
  2. Pull up to remove the shift control knob (2) from the transmission control assembly.

Installation Procedure

    Object Number: 896833 Size: SH
  1. Install the shift control knob (2) to the transmission shift control assembly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the threads of the shift knob set screw.

    3. Tighten
    Tighten the shift control knob set screw (1) to 2 N·m (18 lb in).