GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Restraints 🢒 SIR 🢒 Instrument Panel Inflatable Restraint Module Replacement

Removal Procedure
  1. Remove trim panel replacement--I/P accessory right-- from the I/P substraight (1). Refer to Instrument Panel Accessory Trim Plate Replacement - Right Side in Instrument Panel, Gages and Console.

    2. Caution: Refer to SIR Caution in the Preface section.

    Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

  2. Disable the SIR system (2). Refer to SIR Disabling and Enabling .

    3. Object Number: 832804 Size: SH
  3. Remove the connector from the I/P .

    4. Object Number: 815844 Size: SH
  4. Remove the inflatable restraint I/P module retaining bolts.
  5. Ensure that you keep a firm hold on the I/P module.

Installation Procedure

    Object Number: 832804 Size: SH
  1. Install the inflatable restraint I/P module (1) to the mounting bracket through the front of the instrument panel .

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the fasteners (2) to the inflatable restraint I/P module .

    3. Tighten
    Tighten the fasteners to 10 N·m (89 lb in).

  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
  4. Install the yellow connector to the I/P.
  5. Install the trim panel to the substraight. Refer to Instrument Panel Accessory Trim Plate Replacement - Right Side in Instrument Panel, Gages and Console.