GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Fuel Level Sensor Replacement

Removal Procedure

    Object Number: 371000 Size: SH
  1. Remove the fuel sender. Refer to Fuel Sender Assembly Replacement .
  2. Place the fuel sender on a clean work surface.
  3. Disconnect the fuel level sensor electrical connector from the module connector.

    4. Object Number: 818020 Size: SH
  4. Remove the fuel level sensor retaining clip.
  5. Squeeze the retaining tabs together in order to slide the fuel lever sensor off of the reservoir.

Installation Procedure

    Object Number: 371000 Size: SH
  1. Slide the fuel lever sensor (3) onto the reservoir until the retaining tabs snap into place.

    2. Object Number: 818018 Size: SH
  2. Connect the fuel level sensor electrical connectors (1) to the module connector.
  3. Install the fuel sender. Refer to Fuel Sender Assembly Replacement .