Instrument Panel Inflatable Restraint Module Switch Replacement for HUMMER H2 2003

Caution: Refer to SIR Caution in the Preface section.

1. Remove the instrument panel trim bezel. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages and Console.



2. Remove the I/P module switch from the lower right opening of the switch plate panel.
3. Disconnect the I/P module switch electrical connector.

1. Connect the I/P module switch electrical connector.



2. Install the I/P module switch into the lower right opening of the switch plate panel.
3. Install the instrument panel trim bezel. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages and Console.