GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Air Inlet Valve Actuator Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
  2. Disconnect the electrical connector from the recirculation actuator.

    3. Object Number: 826725 Size: SH
  3. Remove the screws from the recirculation actuator (1).
  4. Remove the recirculation actuator (1) from the HVAC module assembly (2).

Installation Procedure

    Object Number: 826725 Size: SH
  1. Install the recirculation actuator (1) to the HVAC module assembly (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws to the recirculation actuator (1).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Connect the electrical connector to the recirculation actuator.
  4. Install the I/P upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
  5. Reprogram the recirculation actuator. Refer to Actuator Recalibration .