Clearance Lamp Replacement SUV

1. Remove the screw from the lamp.



2. Remove the lamp by tilting back the assembly and disengaging the hook.
3. Remove the bulb socket.
4. Remove the lamp from the vehicle.
5. Remove the bulb.

1. Install the bulb.



2. Install the lamp to the vehicle.
3. Install the bulb socket.
4. Install the lamp assembly by engaging the hook and tilting the assembly down into place.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

5. Install the screw to the lamp assembly.

Tighten
Tighten the screw to 2.5 N·m (22 lb in).