Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Light Test | Daytime Running Lamps | The BCM activates the DRL output when you select ON, and when there is sufficient light to the ambient light sensor and you select ON. The daytime running lights will remain illuminated until commanded OFF. |
Light Test | Parking Lamps | The BCM activates the park lamp relay when you select ON. The park lamps illuminate until commanded OFF. |
Light Test | Backup Lamps | The BCM activates the backup lamp output when you select ON. The backup lamps illuminate until commanded OFF. |
Lamp Dimming Test | Dimming | The BCM adjusts the dimming output level when you select the percentage of illumination desired. The dimmable I/P lamps will illuminate to the level set by the scan tool when the I/P dimmer switch is in the FULL DIM position. |
Inadvertant Power | -- | The BCM deactivates the Inadvertant Power output when you select Off. The lamps recieve no signal untill commanded OFF. |
