GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Rear Window Wiper and Washer Switch Replacement

Removal Procedure
  1. Remove the trim bezel. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side in Instrument Panel, Gages and Console.

    2. Object Number: 832834 Size: SH
  2. Insert a flat bladed tool at the top and bottom of the switch assembly in order to remove the switch assembly.
  3. Pull out the switch assembly in order to gain access to the connector.
  4. Disconnect the electrical connector.
  5. Remove the switch from the I/P.

Installation Procedure

    Object Number: 832834 Size: SH
  1. Connect the electrical connector to the switch assembly.
  2. Push in the switch assembly until both tabs click in place.
  3. Install the trim bezel. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side in Instrument Panel, Gages and Console.