GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Center Support Bracket Replacement

Removal Procedure
  1. Remove the center console from the center console bracket. Refer to Console Replacement .
  2. Remove the extention panel from the I/P. Refer to Instrument Panel Extension Trim Plate Replacement .

    3. Object Number: 832818 Size: SH
  3. Remove the bolt holding the bracket assembly-I/P center.

    4. Object Number: 832819 Size: SH
  4. Remove the bracket from the I/P and floor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 832818 Size: SH
  1. Align the center bracket with the I/P and floor, then bolt the bracket in place.

    2. Tighten
    Tighten the bolt to 25 N·m (18 lb in).

  2. Install the extention panel the I/P. Refer to Instrument Panel Extension Trim Plate Replacement .
  3. Install the center console to the center console bracket. Refer to Console Replacement .