GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Front Floor Console Compartment Door Lock Cylinder Replacement

Removal Procedure
  1. Remove the console compartment door from the center console. Refer to Front Floor Console Compartment Door Replacement .
  2. Place the compartment door on a work bench.

    3. Object Number: 838962 Size: SH
  3. Remove the 11 retaining screws.
  4. Remove the inside panel to gain access to the lock cylinder.

    5. Object Number: 826120 Size: SH
  5. Remove the lock cylinder retaining clip (1) from the latch assembly.
  6. Remove the lock cylinder from the latch assembly by pressing outwards.

Installation Procedure

    Object Number: 826120 Size: SH
  1. Install a new lock cylinder (2) by pressing inwards until it is seated.
  2. Install the retaining clip (1).
  3. Ensure the linkage for the top compartment door are all connected before installing the inside panel.
  4. Install the inside panel.

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 838962 Size: SH
  5. Install the 11 screws.

    6. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).


    Object Number: 838971 Size: SH
  6. Inspect the operation of the top compartment door.
  7. Install the compartment door to the console. Refer to Front Floor Console Compartment Door Replacement .