Symbol | Description |
---|---|
| ABS: Refer to ABS Description and Operation in Antilock Brake System |
| Air Bag: Refer to SIR System Description and Operation in SIR |
(Canada) BRAKE (U.S.) | Brake: Refer to Brake Warning System Description and Operation in Hydraulic Brakes |
| Charge: Refer to Charging System Description and Operation in Engine Electrical |
(Canada) CRUISE (U.S.) | CRUISE: Refer to Cruise Control Description and Operation in Cruise Control |
| Fasten Safety Belt: Refer to Seat Belt System Description and Operation in Seat Belts |
| High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
Low Fuel | Low Fuel: Refer to Indicator/Warning Message Description and Operation |
PARK BRAKE | Park Brake: Refer to Park Brake System Description and Operation in Park Brake |
(Canada) SECURITY (U.S.) | SECURITY: Refer to Theft Systems Description and Operation in Theft Deterrent |
(Canada) SERVICE 4WD (U.S.) | SERVICE 4WD: Refer to Transfer Case Description and Operation in Transfer Case - BW 4484 |
(Canada) SERVICE ENGINE SOON (U.S.) | Malfunction Indicator Lamp (MIL): Refer to Powertrain Control Module Description in Engine Controls - 4.3L, 5.3L, and 6.0L |
| Tow/Haul: Refer to Transmission Component and System Description in Automatic Transmission - 4L60-E |
| Traction Off: Refer to ABS Description and Operation in Antilock Brake System |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
Symbol | Description |
---|---|
BATTERY NOT CHARGING | Refer to Charging System Description and Operation in Engine Electrical |
CARGO DOOR AJAR | Refer to Door Ajar Indicator Description and Operation in Doors |
CHANGE ENGINE OIL | Refer to Indicator/Warning Message Description and Operation |
CHECK ENGINE OIL LEVEL | Refer to Indicator/Warning Message Description and Operation |
CHECK WASHER FLUID | Refer to Wiper/Washer System Description and Operation in Wiper/Washer System |
DRIVER DOOR AJAR | Refer to Door Ajar Indicator Description and Operation in Doors |
ENGINE COOLANT HOT | Refer to Cooling System Description and Operation in Engine Cooling |
ENGINE OVERHEATED | Refer to Cooling System Description and Operation in Engine Cooling |
FUEL LEVEL LOW | Refer to Indicator/Warning Message Description and Operation |
ICE POSSIBLE | Refer to Indicator/Warning Message Description and Operation |
LEFT REAR DOOR AJAR | Refer to Door Ajar Indicator Description and Operation in Doors |
LOW COOLANT LEVEL | Refer to Cooling System Description and Operation in Engine Cooling |
OIL LIFE RESET | Refer to Indicator/Warning Message Description and Operation |
OIL PRESSURE LOW | Refer to Indicator/Warning Message Description and Operation |
OVERSPEED | Refer to Indicator/Warning Message Description and Operation |
PASSENGER DOOR AJAR | Refer to Door Ajar Indicator Description and Operation in Doors |
PROGRAM CLUSTER | Refer to Indicator/Warning Message Description and Operation |
REAR ACCESS OPEN | Refer to Interior Lighting Systems Description and Operation in Lighting Systems |
REDUCED ENGINE POWER | Refer to Cooling System Description and Operation in Engine Cooling |
REPLACE LIFTGATE FUSE | Refer to Door Ajar Indicator Description and Operation in Roof |
RIGHT REAR DOOR AJAR | Refer to Door Ajar Indicator Description and Operation in Doors |
RKA # BATTERY LOW | Refer to Keyless Entry System Description and Operation in Keyless Entry |
SECURITY | Refer to Theft Systems Description and Operation in Theft Deterrent |
SERVICE 4WD | Refer to Transfer Case Description and Operation in Transfer Case - BW 4484 |
SERVICE AIR BAG | Refer to SIR System Description and Operation in SIR |
SERVICE AIR SUSPENSION | Refer to Air Suspension Description and Operation in Air Suspension |
SERVICE BRAKE SYSTEM | Refer to Brake Warning System Description and Operation in Hydraulic Brakes |
TIGHTEN FUEL CAP | Refer to Indicator/Warning Message Description and Operation |
TRACTION ACTIVE | Refer to ABS Description and Operation in Antilock Brake Systems |
TRANS IN WARM UP | Refer to Electronic Component Description in Automatic Transmission - 4L60-E |
TRANSMISSION HOT | Refer to Transmission Component and System Description in Automatic Transmission - 4L60-E |
TRANS HOT IDLE ENGINE | Refer to Transmission Component and System Description in Automatic Transmission - 4L60-E |
TURN SIGNAL ON | Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
VEHICLE SPEED LIMITED | Refer to Indicator/Warning Message Description and Operation |
The instrument panel cluster (IPC) illuminates the CHANGE ENGINE OIL message when the powertrain control module (PCM) determines that the engine oil should be changed. The IPC receives a class 2 message from the PCM requesting illumination. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting in Maintenance and Lubrication.
The IPC illuminates the CHECK OIL LEVEL message in the driver information center (DIC) when the powertrain control module (PCM) detects a low engine oil level condition. The PCM only monitors the oil level switch signal circuit for a brief period between key on and ignition crank. The IPC receives a class 2 message from the PCM requesting illumination.
The IPC illuminates the FUEL LEVEL LOW message in the driver information center (DIC) and the LOW FUEL indicator when the IPC detects that the fuel level is less than a pre-determined value. The IPC receives a class 2 message from the PCM indicating fuel level percent.
The IPC illuminates the ICE POSSIBLE message in the driver information center (DIC) when the outside air temperature drops below 2.5°C (36.5°F). The IPC receives a class 2 message from the body control module (BCM) indicating the outside air temperature.
The IPC illuminates the OIL LIFE RESET message when the powertrain control module (PCM) determines that the engine oil should be changed. The IPC receives a class 2 message from the PCM indicating the remaining oil life percent. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting in Maintenance and Lubrication.
The IPC illuminates the OIL PRESSURE LOW message in the driver information center (DIC) when the PCM detects a low oil pressure condition with the signal circuit low. The IPC receives a class 2 message from the PCM requesting illumination.
The IPC illuminates the OVERSPEED indicator when the IPC detects that the vehicle speed is more than 120 km/h (75 mph).
The IPC illuminates the PROGRAM CLUSTER message in the driver information center (DIC) when the IPC has not been programmed after an IPC replacement. Refer to Service Programming System (SPS) in Programming.
The IPC illuminates the TIGHTEN FUEL CAP message in the driver information center (DIC) when the powertrain control module (PCM) detects a low fuel pressure condition. The IPC receives a class 2 message from the PCM requesting illumination.
The IPC illuminates the VEHICLE SPEED LIMITED message in the driver information center (DIC)